AMRI 1-0402 Cork Underlay for Points (2 pack) | HO/OO/N Gauge

AMRI 1-0402 Cork Underlay for Points (2 pack) | HO/OO/N Gauge Cork underlay for point work, suitable for OO/HO/N gauges. 

Bachmann 44505 15" Radius Curved Track - 4 pack | HO Gauge

Bachmann 44505 15" Radius Curved Track - 4 pack | HO Gauge Nickel silver track with gray roadbed; 4/card 15” Radius Curved Track is best used to make railroad curves in tight spots on your railroad layout and appropriate for...

Bachmann 44557 #4 Turnout Left | HO Gauge

Bachmann 44557 #4 Turnout Left | HO Gauge 1 per card Analog turnout for manual and/or electrical operation.  Note: All analog turnouts (non-DCC) require 16V AC or DC accessory power supply for operation. This may be available from the accessory...

Bachmann 44558 #4 Turnout Right | HO Gauge

Bachmann 44558 #4 Turnout Right | HO Gauge 1 per card Analog turnout for manual and/or electrical operation.  Note: All analog turnouts (non-DCC) require 16V AC or DC accessory power supply for operation. This may be available from the accessory...

Bachmann 44559 #6 Turnout Left | HO Gauge

Bachmann 44559 #6 Turnout Left | HO Gauge 1 per card Longer and with a wider radius turnout than the E-Z Track® Remote Switch - Left, the #6 Turnout - Left allows for smoother transitions between tracks during switching operations. It also...

Bachmann 44560 #6 Turnout Right | HO Gauge

Bachmann 44560 #6 Turnout Right | HO Gauge 1 per card Analog turnout for manual and/or electrical operation.  Note: All analog turnouts (non-DCC) require 16V AC or DC accessory power supply for operation. This may be available from the accessory...

Bachmann 44565 #5 Turnout Left | HO Gauge

Bachmann 44565 #5 Turnout Left | HO Gauge 1 per card Longer than E-Z Track® Remote Turnout - Left, the #5 Turnout - Left allows for smoother transitions between tracks during switching operations. It also accommodates locomotives and rolling...

Bachmann 44566 #5 Turnout Right | HO Gauge

Bachmann 44566 #5 Turnout Right | HO Gauge 1 per card Longer than E-Z Track® Remote Turnout - Right, the #5 Turnout - Left allows for smoother transitions between tracks during switching operations. It also accommodates locomotives and rolling...

Bachmann 44569 #5 Wye Turnout | HO Gauge

Bachmann 44569 #5 Wye Turnout | HO Gauge 1 per card The #5 Wye Turnout allows for smoother transitions between tracks during switching operations and accommodates locomotives and rolling stock with relatively long wheel bases. It can also be...

Hand Made Accessories 1957 Hand Decoupler

Hornby R394 Hydraulic Buffer Stop | OO Gauge

Hornby R394 Hydraulic Buffer Stop | OO Gauge With spring-loaded buffers.  Clips to straight or curved track. Other Information BRAND   Hornby SKU   R394 click here to view more from 'HORNBY'

Hornby R462 Curved Platform Large Radius | OO Gauge

Hornby R462 Curved Platform Large Radius | OO Gauge Clips into other platform sections. Fits outside second-radius curved track. Buy in Bulk and Save This item is available in a box of 6 at $48.30 per box ($8.05 per piece). Simply add...

Hornby R463 Curved Platform Small Radius | OO Gauge

Hornby R463 Curved Platform Small Radius | OO Gauge Clips into other platform sections. Fits inside first-radius curved track. Single Piece Buy in Bulk and Save This item is available in a box of 6 at $48.30 per box ($8.05 per piece)...

Hornby R610 Short Straight Track | OO Gauge

Hornby R610 Short Straight Track | OO Gauge High quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains. Being fully compatible with the Code 100 track range, it need never be discarded as your layout...

Hornby R614 Left-Hand Diamond Crossing | OO Gauge

Hornby R614 Left-Hand Diamond Crossing | OO Gauge High quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains. Being fully compatible with the Code 100 track range, it need never be discarded as your layout...

Hornby R617 Uncoupling Ramp | OO Gauge

Hornby R617 Uncoupling Ramp | OO Gauge Spring-loaded ramp clips into straight track at the position you choose, and automatically lifts couplings when the train is halted over the ramp. Set includes a marker post to help you align the...

Hornby R618 Double Isolating Track | OO Gauge

Hornby R618 Double Isolating Track | OO Gauge Used to isolate track sections over both rails. Length: 68mm | Single Piece FAQ: Is Hornby track compatable with other brands? Yes. Hornby track is fully compatable with other brands using HO or...

Hornby R626 Underlay Sheets (pack of 4)

Hornby R626 Underlay Sheets (pack of 4) Pack of four sheets 267mm x 89mm each, for cutting and fitting under trackside accessories that have to be raised to the level of the track. Other Information BRAND   Hornby SKU   R626 ...

Hornby R643 Half Curve 2nd Radius | OO Gauge

Hornby R643 Half Curve 2nd Radius | OO Gauge High quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains. Being fully compatible with the Code 100 track range, it need never be discarded as your layout...

Hornby R8074 Left-Hand Curved Point | OO Gauge

Hornby R8074 Left-Hand Curved Point | OO Gauge Hornby points are supplied for operation by hand. They may be converted to remote control electric operation by using a 'point motor', see Hornby R8014 for more. High quality rigid unit trackage...

Hornby R8075 Right-Hand Curved Point | OO Gauge

Hornby R8075 Right-Hand Curved Point | OO Gauge Hornby points are supplied for operation by hand. They may be converted to remote control electric operation by using a 'point motor', see Hornby R8014 for more. High quality rigid unit trackage...

Hornby R8077 Left Hand Express Point | OO Gauge

Hornby R8077 Left Hand Express Point | OO Gauge Hornby points are supplied for operation by hand. They may be converted to remote control electric operation by using a 'point motor', see Hornby R8014 for more. High quality rigid unit trackage...

Hornby R8078 Right Hand Express Point | OO Gauge

Hornby R8078 Right Hand Express Point | OO Gauge Hornby points are supplied for operation by hand. They may be converted to remote control electric operation by using a 'point motor', see Hornby R8014 for more. High quality rigid unit trackage...

Hornby R8232 Digital Electric Point Clips (x20) | OO Gauge

Hornby R8232 Digital Electric Point Clips (x20) | OO Gauge To obtain the best from the Hornby Digital system it is recommended that all points are made ‘live’ by attaching 2 x R8232 DCC Electric Point Clips to each point. Point clips...

Kato 24-815 Unitrack UniJoiners (pack of 20)

Kato 24-815 Unitrack UniJoiners (pack of 20) Conductive rail joiners for use with all Kato Unitrack products in both HO and N Scale. Kato's line of ground level UNITRACK offers a variety of pieces and turnouts to allow you to build...

Kato 24-816 Unitrack Insulated UniJoiners (20 pack)

Kato 24-816 Unitrack Insulated UniJoiners (20 pack) Insulated (non-conductive) rail joiners for use with all Kato Unitrack products in both HO and N Scale. Kato's line of ground level UNITRACK offers a variety of pieces and...

Noch 13610 Pulley Bracket System | HO Gauge

Noch 13610 Pulley Bracket System | HO Gauge Laser cut 3D minis. Includes 1 pressing roller case, 2 single roller supports, 2 double roller supports (non functioning, aesthetic purposes) Other...

Peco PL-12X Turnout Motor Adaptor Base without Over Centre Spring

Peco PL-12X Turnout Motor Adaptor Base without Over Centre Spring 2 Adaptor Bases are included, with optional extension arms, to enable PL-10 Turnout Motors to be mounted on the surface of the baseboard. This unit relies on the over centre...

Peco PL-22 Switch On-Off

Peco PL-22 Switch On-Off Single Pole On/Off Switch. Use this to control features such as lighting circuits, or as a section switch where only 1 controller is used. Recommended to be used with: Peco PL-27 Switch Console Unit Peco PL-28 Switch...

Peco PL-27 Switch Console Unit

Peco PL-27 Switch Console Unit Houses 6 PL-26 Passing Contact Switches, PL-22 On/Off Switches or PL-23 On/On Switches. Recommended to be used with: Peco PL-22 Switch On-Off Peco PL-23 Single Pole Changeover On/On Peco PL-26B Passing Contact...

Peco PL-28 Switch Mounting Plates - pack of 6

Peco PL-28 Switch Mounting Plates - pack of 6 Use these when creating a diagrammatic control panel to clip fit PL-26 Passing Contact Switches, PL-22 On/Off Switches and PL-23 On/On Switches in the required place. Recommended to be used with: ...

Peco PL-34 Wiring Loom for Turnout Motors

Peco PL-34 Wiring Loom for Turnout Motors Makes wiring the PL-10 series of Motors quick and easy. Just a simple push fit onto the motor terminals; the other ends are tinned and ready for the PL-39 Terminal Block, PL-50 Switch Module Unit, or...

Peco SL-10 Metal Rail Joiners (Code 100) - 24 pack | O/HO/OO Gauges

Peco SL-10 Metal Rail Joiners (Code 100) - 24 pack | O/HO/OO Gauges Designed to be used with our 00/H0 Code 100 track systems (Ref nos. SL-100 and 102); also with 0 Gauge Bullhead (SL-700BH) and 0-16.5/0n30 (SL-500) track systems. FAQ: Is Peco...

Peco SL-100 Flexible Track, Wooden Sleeper (Code 100) | OO Gauge

Peco SL-100 Flexible Track, Wooden Sleeper (Code 100) | OO Gauge If you wish to mix wheel standards on your 00/H0 layout, this is the trackage to choose. Code 100 rail allows flange depths up to 1.6mm which means that both vintage and current...

Peco SL-100F Flexible Track, Wooden Sleeper (Code 75) - box of 25 | OO Gauge

Peco SL-100F Flexible Track, Wooden Sleeper (Code 75) - box of 25 | OO Gauge Peco Streamline Code 75 track meets the standards of enthusiasts who prefer to run trains on scale height rail. Today most manufacturers' wheels are suitable for use on...

Peco SL-100F Flexible Track, Wooden Sleeper (Code 75) | OO Gauge

Peco SL-100F Flexible Track, Wooden Sleeper (Code 75) | OO Gauge Peco Streamline Code 75 track meets the standards of enthusiasts who prefer to run trains on scale height rail. Today most manufacturers' wheels are suitable for use on Code 75...

Peco SL-11 Insulated Rail Joiners (Code 100) - 12 pack | O/HO/OO Gauges

Peco SL-11 Insulated Rail Joiners (Code 100) - 12 pack | O/HO/OO Gauges Designed to be used with our 00/H0 Code 100 track systems (Ref nos. SL-100 and 102); also with 0 Gauge Bullhead (SL-700BH) and 0-16.5/0n30 (SL-500) track systems. Design...

Peco SL-111 Insulated Rail Joiners (Code 75 & Code 83) - 12 pack | HO/OO Gauges

Peco SL-111 Insulated Rail Joiners (Code 75 & Code 83) - 12 pack | HO/OO Gauges Peco Streamline Code 75 track meets the standards of enthusiasts who prefer to run trains on scale height rail. This rail height is used for our 00/H0 Fine...

Peco SL-113 Transition Track Joiner Code 75-100 | OO Gauge

Peco SL-113 Transition Track Joiner Code 75-100 | OO Gauge For use between sections of Code 100 and Code 75 track, so for example could be used to incorporate a Code 75 Asymmetric 3- way Turnout (SL-E199) into a Code 100 layout, or to connect a...

Peco SL-14 Track Fixing Pins (14mm)

Peco SL-14 Track Fixing Pins (14mm) 14mm, chemically blackened mild steel. Suitable for all Peco track systems. Other Information BRAND   Peco SKU   SL-14 SCALE   O/HO/OO/HOm/HOn3/OO9/HOn30/N click here to view more from 'PECO'

Peco SL-36 6ft Way Gauge | OO/HO Gauge

Peco SL-36 6ft Way Gauge | OO/HO Gauge A small but useful item to ensure the accurate spacing of double tracks in 00/H0 along both straight and curved sections. Also gauges platform height to the recommended 14mm (3ft 6ins in 4mm scale)...

Peco SL-40 Buffer Stop Rail Built Type | OO Gauge

The Peco SL40 OO/HO Buffer Stop (rail type) is a detailed plastic model of the standard British Railways type. It consists of 3 plastic moulded parts which, after assembly, clip onto the rails.  TIP: A little bit of clear drying super glue will...

Peco SL-50 Ballast Inlay Roll 5m

Peco SL-50 Ballast Inlay Roll 5m Moulded foam ballast inlay in a realistic brown colour. Moulded units fit Turnouts and Crossings, and rolls are available for plain track (Streamline and Setrack). This inlay system adds extra realism...

Peco SL-86 Code 100 Right Hand Large Curved Turnout - Insulfrog | OO Gauge

Peco SL-86 Code 100 Right Hand Large Curved Turnout - Insulfrog | OO Gauge Peco Streamline 00 Gauge Code 100 The wide range of turnouts and crossings in this series includes every type, and the geometry of this range has been cleverly designed...

Peco SL-87 Code 100 Left Hand Large Curved Turnout - Insulfrog | OO Gauge

Peco SL-87 Code 100 Left Hand Large Curved Turnout - Insulfrog | OO Gauge Peco Streamline 00 Gauge Code 100 The wide range of turnouts and crossings in this series includes every type, and the geometry of this range has been cleverly designed to...

Peco SL-91 Code 100 Right Hand Small Turnout - Insulfrog | OO Gauge

Peco SL-91 Code 100 Right Hand Small Turnout - Insulfrog | OO Gauge Peco Streamline 00 Gauge Code 100 The wide range of turnouts and crossings in this series includes every type, and the geometry of this range has been cleverly designed to make...

Peco SL-92 Code 100 Left Hand Small Turnout - Insulfrog | OO Gauge

Peco SL-92 Code 100 Left Hand Small Turnout - Insulfrog | OO Gauge Peco Streamline 00 Gauge Code 100 The wide range of turnouts and crossings in this series includes every type, and the geometry of this range has been cleverly designed to make...

Peco SL-93 Code 100 Short Crossing - Insulfrog | OO Gauge

Peco SL-93 Code 100 Short Crossing - Insulfrog | OO Gauge Peco Streamline 00 Gauge Code 100 The Short Crossing is double the angle of other track components in this range, this enables it to be used to form scissors formations in conjunction...

Peco SL-95 Code 100 Right Hand Medium Turnout - Insulfrog | OO Gauge

Peco SL-95 Code 100 Right Hand Medium Turnout - Insulfrog | OO Gauge Peco Streamline 00 Gauge Code 100 The wide range of turnouts and crossings in this series includes every type, and the geometry of this range has been cleverly designed to make...

Peco SL-96 Code 100 Left Hand Medium Turnout - Insulfrog | OO Gauge

Peco SL-96 Code 100 Left Hand Medium Turnout - Insulfrog | OO Gauge Peco Streamline 00 Gauge Code 100 The wide range of turnouts and crossings in this series includes every type, and the geometry of this range has been cleverly designed to make...

Peco SL-97 Code 100 Small Y Turnout - Insulfrog | OO Gauge

Peco SL-97 Code 100 Small Y Turnout - Insulfrog | OO Gauge Peco Streamline 00 Gauge Code 100 2 of these turnouts can be combined with a short crossing (SL-93) to make a compact double junction (Overall length 275mm). The wide range of turnouts...

Peco SL-E186 Code 75 Right Hand Large Curved Turnout - Electrofrog | OO Gauge

Peco SL-E186 Code 75 Right Hand Large Curved Turnout - Electrofrog | OO Gauge Length: 258mm | Radius: 1524mm & 762mm Recommended to be used with Peco SL-110 Conducting Rail Joiners (for Code 75 track) Peco SL-111 Insulated Rail...